Pneumatic Conveying
As one of the world’s leading names in the supply of systems and equipment for the pneumatic transport of dry materials in large quantities, you would expect us to know a thing or two about innovation, and you would be right. For example, take the legendary Claudius Peters ‘X-pump’ and the ‘aeroslide’ devices, all of which have revolutionized pneumatic conveying.
Fluidcon
The Claudius Peters FLUIDCON system offers the advantages of pneumatic conveying with considerably lower energy requirement owing to it’s unique aeroslide transportation principle within the transport pipe. Additionally, it provides a dense phase system with increased bulk material load. Depending on the transport pipe routing, the FLUIDCON system can substantially reduce power consumption. and be used to convey all fine bulk solids which can be fluidized with low air velocities expanding homogeneously during the process.
Rotary Feeder TWA
The TWA Rotary Feeder represents a drastic change in design compared with common rotary feeder technology. The 500 Brinell Ni-Hard rotor cell as well as the 500 Brinell Ni-Hard liner have clearly higher lifetimes than the traditional rotary feeders (e.g. coated with tungsten carbide). The wear is further minimized by a total of 12 chambers and thus 12 sealing webs.
Two Way Valve
The Claudius Peters Two-Way Valve is installed in pneumatic conveying pipelines for alternative feeding of two material conveying routes. The most striking feature of the two-way valve is its compact design. The drive is flanged directly to the shaft which allows for a most precise positioning of the valve disk. The Claudius Peters Two-Way Valve is designed for non-explosive and explosive bulk materials.